RCA Receiver



RCA Receiver is an additional audio receiver and it can be connected to any Pebble Audio USB or RCA Transmitter using a simple connection procedure.

Two active rear speakers

This is how you can add a second receiver to our RCA2RCA product for for example for the second rear channel.

After the connection to a transmitter has been established, RCA Wireless Audio Receiver functions exactly like the first receiver that has been acquired before as a part of USB2RCA or RCA2RCA.

The RCA Wireless Audio Receiver has been built into a high quality aluminum casing and it can be easily attached to an iron surface (e.g. to the casing of a power amplifier) with an integrated magnet. The external antenna guarantees excellent radio performance.


Outputs from the RCA Receiver:

  • 2 x RCA jacks for analogue audio
  • 1 x 3,5 mm mono jack for +12V / 100mA trigger signal output

Power Supply to RCA Receiver:

  • 1 x DC-socket 2.1 x 5.5 mm

Technical Specification:

  • Sample Rate: 44.1 kHz and 48 kHz
  • Resolution: 16-bit
  • THD+N: <0.005 % (-3 dBFS)
  • Signal to Noise Ratio: >95 dB(A)
  • Analogue Output Level: +4dBu (~1,23V RMS)
  • Frequency Response: Depends on the transmitter settings
  • Transmission Delay: Depends on the transmitter settings
  • RF Band: 2.4 GHz (ISM)
  • Operating Range: 75-100 m line of sight depending on transmitter

Power Consumption:

  • RCA Receiver during active operation: <1.2 W (excluding the +12V trigger output load)
  • RCA Receiver in standby mode: <0.5 W


  • 1 x RCA Receiver
  • 1 x 12V Power Supply with a Europlug connector
  • 1 x RCA Stereo Cable
  • 1 x +12V Trigger Cable
  • 1 x Tool for connecting devices
  • 1 x Getting Started Guide

Sales Package:

  • Size: 210 mm x 125 mm x 65 mm
  • Weight: 0.55 kg


  • Made in Finland

Pebble Audio Oy reserves the right to change this specification without prior notice.